DOR's industry-best short arms, made from 2" OD 1/4" wall DOM tubing on both upper and lower arms, and with the world famous 1.25" shank Johnny Joints at both ends, you simply will not find a better quality short arm anywhere at this price. These are beefier than arms than cost twice as much, and are precision cut, notched, and welded all in a jig for incomparable accuracy.
These are the bent arms with Johnny Joints, reverse threaded for easy adjustability on the truck. These fit 2nd gen trucks, 1994 to 2002, and allow 1.5" extra tire clearance for those who are running factory wheels, or wheels with high backspacing (more than 4.5"), or those with wide tires. If you are having problems with your tires rubbing the control arms you have now, these are a great fix for that problem. We have not found a wheel or tire combination that does rub with these short arms, so they should be a "cure all" regardless of your setup. All arms are made to push the axle 1/2" forward of the stock location for more tire clearance and better suspension and steering geometry, however you can adjust them out up to 2" from that point. These arms are powdercoated satin black and have our DOR stickers on each arm.