DOR's industry-best short arms, made from 2" OD 1/4" wall DOM tubing on both upper and lower arms, and with our industry-best greaseable bushings, you simply will not find a better quality short arm anywhere at this price. These are beefier than arms than cost twice as much, and are precision cut, notched, and welded all in a jig for incomparable accuracy.
These are the bent arms for 2nd gen trucks, 1994 to 2002. These allow 1.5" extra tire clearance for those who are running factory wheels, or wheels with high backspacing (more than 4.5"), or those with wide tires. If you are having problems with your tires rubbing the control arms you have now, these are a great fix for that problem. We have not found a wheel or tire combination that does rub with these short arms, so they should be a "cure all" regardless of your setup.
These arms are usually in stock but if we run out, they just take a few days to make. The arms are bent on a CNC tube bender and then MIG welded in a jig so there are no variations. All arms are made to push the axle 1/2" forward of the stock location at a given lift height, for more tire clearance and better suspension and steering geometry. They are powdercoated gloss black and come with our DOR logo stickers on each arm. This is a set of 2 upper arms and 2 lower arms. You will need to reuse your factory hardware, these bolt right in using the factory cam bolts and control arm hardware.
When listed in stock, that is for the stock to 3" length only. Other sizes are built to order and take 5 to 10 business days to ship.