Dodge Off Road Heavy Duty High Steer Kit 94-13
Tons of extra ground clearance

Dodge Off Road Heavy Duty High Steer Kit 94-13

Your Price: $699.00
Ships in 10 to 15 Days
Part Number:1014-HS

Choose Options

Select Year Model
Lift Height
Add heim seals?
Pitman arm bolt
For all of the hardcore wheeling rigs out there, we now offer the highest-clearance steering linkage available for your Ram truck.  This setup is similar to our drill-out T style linkage, except the tie rod mounts above the knuckles instead of below the knuckle.  This gives you an extra 2" of clearance under the tie rod, which is extremely valuable on rock crawlers and desert trucks.  In most cases, any rocks, trees, or trail trash will hit your axle tube or differential before they hit the tie rod, so this can be the difference between continuing to wheel or loading up on a trailer.  

The steering linkage itself uses the same materials as our HD steering linkage - 1.5" OD x .250" wall DOM tube for the tie rod and drag link, a custom 1018 machined drag link mount, 7/8" chromoly heims with 303 stainless hardware, and 3/4" Grade 8 bolts to bolt it all together.  You will need to drill both of your knuckles out to 3/4", as well as the pitman arm (unless you purchase our 4140 tapered pitman arm bolt, see options). 

This setup only works on trucks with at least 3" of lift.  Your track bar and drag link angle will not be parallel unless you modify the track bar mount on one end or the other, but for a wheeling rig the difference in angles won't matter much.  We do make a weld-on axle mount that will raise your track bar up and will help keep the angles parallel.  This steering kit does not fix all of your problems, it is intended to be used as part of an upgraded front end.  The linkage itself is extremely tough and works great, but you will need to do some work with the track bar to completely remove bumpsteer.  On higher lift heights, you may be able to negate the flatter drag link angle by running the drag link on top of the pitman arm, but using a larger track bar drop bracket.  It is up to you to get the angles correct.  

Our high steer linkage will clear your sway bar mount and aftermarket steel diff cover.  

Stock low-mount steering stabilizers do not work well with this setup.  A high-mount setup would be best.  

If you want a bolt-in kit with no drilling, see the related products section below.


This fits all Ram 1500 4x4 trucks from 1994 to 2001 with at least 5" suspension lift. 

This fits all Ram 2500 and 3500 4x4 trucks from 1994 to 2013 with at least 3" suspension lift. 

Related Items

Accessories

DOR Heavy Duty Steering Kit, Bolt-In, Stabilizer Included
Average Rating(1)
$999.00
Ships in 2 to 3 Weeks
DOR Heavy Duty Steering Kit, Bolt-In, Standard Kit
Average Rating(6)
$799.00
Ships in 2 to 3 Weeks
Crossover Steering Kit Welded
Average Rating(2)
$439.00
Ships in 3 to 5 Days
Extreme Duty Crossover Steering Kit Welded 94-12
$599.00
Made to Order - Ships in 3 to 5 Days