DOR's industry-best short arms, made from 2" OD 1/4" wall DOM tubing on both upper and lower arms, with dual adjustable 1.25" shank Currie Johnny Joints for the ultimate in strength, misalignment, and adjustability. Misalignment equates to suspension travel, allowing your axle to move more freely. If you use your truck off road, having suspension joints at both ends is the way to go.
These are the straight arms for 3rd gen trucks, 2003 to 2008. If you have factory wheels and larger/wider tires, you might have some minor rubbing when turned at full lock, especially if your axle is not centered side to side (check out our adjustable track bar to fix that issue). These arms work best with wheels that have more offset than stock, preferably more than 5.5" backspacing (for 8" wide wheels). However, many customers run them with stock wheels and tires without any issues. Because the arms are made from round DOM tubing, if the tires do rub, you almost don't feel it.
All arms are made to push the axle 1/2" forward of the stock location for more tire clearance and better suspension and steering geometry. Each set is custom built for your particular suspension height, so let us know how tall your truck is when checking out. The arms are powdercoated gloss black.