If you have one of the old Dick Cepek long arm kits and the bushings have worn out, or you have bent your arms, you've probably figured out that you can't replace those items anymore. Extreme Suspensions, the company that made the Cepek long arm kit, went out of business years ago and when they closed up shop, their custom-sized bushings ceased to exist. We are offering a bolt-in replacement set of long arms that will fit your Dick Cepek long arm brackets, and give you bushings that are much bigger, stronger, greaseable, and replaceable. Our bushings are 2 5/8" OD and we use a 1" DOM inner sleeve, with the highest quality polyurethane bushing material available. You will be able to replace these bushings in the future if they ever wear out. We make our arms out of 2" OD x .250" wall DOM tubing on the upper and lower arms, so you'll also get a much stronger set of arms out of this deal. For a complete upgrade, buy our full long arm kit with new brackets, which are made out of 3/8" steel and bolt up to the same bolt holes as the Cepek brackets. These arms ship in bare steel unless otherwise noted. The arms are exactly the same dimensions as the Cepek arms, just with better materials and bigger bushings. If you need custom lengths or want to upgrade to Johnny Joints at one or both ends, email us and we can put together a quote for you.
On 1994-1999 models, we supply new upper control arm bolts for the axle bracket. You'll need to drill these holes out to a 9/16" diameter. There is a $10 charge for the extra hardware. 2000-2002 models do not require the extra bolts.