Dodge Off Road Rear Sway Bar Spacer Blocks

If you have a 2014 to 2019 Ram 2500 4x4 and want to run a larger diff cover on your rear axle, you need these spacers to get the sway bar further away from the axle.  Mag Hytec covers and others with large fins will rub the factory sway bar if you do not run these spacer blocks.  We CNC cut these from 3/16" HRPO, bend them in our 40 ton press, MIG weld the two halves together, and powder coat them satin black.  You will get four Class 12.9 black oxide bolts to replace your factory hardware.  These spacers are 1.75" thick so you'll gain more than enough clearance for any diff cover on the market.  No modification to the sway bar or axle is needed to run these; they bolt right up in just a few minutes.  Sold as a pair of blocks, with a bag of four bolts.