Dodge Off Road Rear Track Bar 2014-2019
Fits 2014 and up Ram 2500 4x4

Dodge Off Road Rear Track Bar 2014-2019

Write a Review
Your Price: $299.00
DOR 5G Rear Track Bar
Part Number: 1043
Availability: Typically Ships in 5 to 10 Days
The Dodge Off Road dual adjustable rear track bar is the answer to your rear suspension needs.  Regardless of what suspension you are running, this track bar will give you some serious beef in the rear end of the truck, replacing the weak factory unit.  Our track bar is 1.5" OD x .40" wall sleeved DOM tube that is precision bent in our CNC bender to clear your rear diff cover, and then we run Currie 1" shank Johnny Joints at both ends which are greaseable and rebuildable.  These joints are forged housing with heat treated steel balls and are actually control arm joints, but we have modified them to be used for your rear track bar.  If you think you have ever seen a beefy track bar, compare it to this one and you'll be in awe.  This is what heavy duty looks like.  The factory rear track bar is non-adjustable and made from thin steel, with cheap rubber bushings on both ends.  It's not what you would want in the rear of a coil-sprung rear suspension on a truck that can tow a mountain.  Our track bar is made to fit stock height trucks, and will adjust out far enough to work on trucks with 12" lift or more.  It works with all drop brackets, as long as the drop bracket works with the stock track bar width and bolt hole size.  This is a direct replacement piece with no drilling, and you'll reuse your factory mounting hardware.  The ends are reverse threaded so you can actually adjust this track bar right on the truck by loosening the 1" jam nuts and spinning the bar.  Alignment doesn't get any easier than that! 

If you have an aftermarket rear suspension, you can avoid using cheap drop brackets that are included in most suspensions and just bolt this right up and adjust it out to center your rear axle.  It works great on rear suspension heights up to 6" without a drop bracket.  Don't introduce a weak point in your rear suspension by bolting a piece of steel between the track bar and frame; just use this track bar and you are good to go.  This is the same track bar that is included in our 3" and 6" suspension systems for the 2014-2018 Ram 2500 trucks, but it works with all other brands.  

This part fits the following trucks: 

Works on all 2014 to 2019 Ram 2500 4x4 trucks, stock height and up.
Works on all 2014 to 2018 Ram 2500 Power Wagon models, stock height and up.

Reward Points

299 points will be rewarded to you when you buy this item.

Related Items

$599.00
Typically Ships in 2 to 3 Weeks
(3)
$329.00
Typically Ships in 5 to 10 Days
$329.00
Typically Ships in 5 to 10 Days
$575.00
Typically Ships in 2 to 3 Weeks
(1)
$299.00
Typically Ships in 5 to 10 Days

Accessories

$699.00
Typically Ships in 2 to 3 Weeks
$199.00
Typically Ships in 3 to 5 Days
(4)
TOP