Dodge Off Road Track Bar 3rd Gen - 03-09

Write a Review

Your Price: $399.00

DOR Track Bar 3G 03-09

Questions about this item? Ask here.

Part Number: 1015

Availability: Typically Ships in 5 to 10 Days

Bolt Sizes

Quantity

Description
Questions and Answers

Made out of 1.5" OD .250" wall 1026 DOM tube, the DOR adjustable 3rd gen track bar is built to last! The frame end utilizes a rebuildable FK uniball, and the axle end has a huge 7/8" chromoly heat-treated heim joint. We use a hex tube adapter at the axle end to help you get the jam nut tight without scratching up the tube. These track bars are bent for extra differential clearance, as well as axle mount clearance, and work on all trucks from just below stock height up to 3" lift. If you have more than 3" of lift, you'll want to order our 4" to 8" kit that includes a drop bracket. See the related items below for more info.

We have added some bolt size options, since there are multiple configurations on 3rd gen track bars. Early 3rd gen models (03-07.5) typically have 14mm bolts at both ends, but some trucks will have a larger bolt on one end, or maybe your mount has been drilled out to run a larger bolt. If you aren't sure which option to select, just pick the one for your year model. Worst case, we can always swap out misalignment spacers if needed, as the track bars are the same. The bolt size change was made in mid-2007 but it wasn't done consistently, so you may need to check your bolts before ordering. If your bolt takes an 18mm socket, then it's a 14mm bolt. If it takes a 21mm socket then you have a 16mm bolt. Check both ends of the track bar because some trucks have different sizes on each end. 2008-2009 models should all have 16mm bolts at both ends, but take a few minutes to double check before ordering to ensure you get the right part for your truck.

Compare our track bar to any others on the market and you will find that ours is built as well as any, however we are able to sell them at a lower price because we build them ourselves. Every step of production is done in our shop, start to finish, and we pass the savings on to our customers. You can pay up to $100 more for the same product, or you can buy our track bar and put that $100 towards one of our steering braces and tighten your whole front end up in one shot.

This fits 2003 to 2009 Ram 2500 and 3500 4x4 trucks, including Power Wagon models.

This also fits 2006 to 2009 Ram 1500 Mega Cab 4x4 trucks.

View all Q&A

Q: What size threads are on the Heim joint on the axle side and right or left hand thread?

Asked by: Aaron Newburn - 3/26/2020

A: The heim is a 7/8"-14 RH thread, the same size used by everyone else. We have them for sale on the site or you can pick one up just about anywhere racing parts are sold.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Dodge Off Road (4/16/2020)

Submit an answer

Q: I ordered this three weeks ago. Where is it? You already charged me.

Asked by: Challis - 10/4/2019

A: If you want to check the status of your order, give us a call or email orders @ dodgeoffroad.com. Sometimes it takes longer to get machined parts in, it's just the nature of this type of business. As posted on our site, all transactions are charged at the time of sale rather than the time of shipping. Otherwise we would pre-auth your card on the day of the sale, the money would be held for 2-3 business days until it fell off your pending charges, then we would have to charge you when the item ships. Most people would rather know exactly when their card is going to be debited, but for us it just simplifies the sale process so we can focus on making your parts rather than calling 40-50 people a day asking for a different card number because the one they gave us declined when we tried to run it on a random day some time after the order was placed.

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Dodge Off Road (11/6/2019)

Submit an answer

Q: What rebuild kit do you order when the bushings etc wear?

Asked by: Scott Klasing - 6/21/2018

A: You can order the heim by itself, that will replace the axle end of the bar and it's as simple as threading the old one out, threading the new one in. For the frame side, you can purchase a new uniball and replace that one. You'll need a press and snap ring pliers. The uniball is a FK WSSX14T and they are available from a wide range of retailers online.
If you have one of our older track bars with the Johnny Joint that has the bushing inside of the housing, then that bushing is available from Currie and you'll need a special press to swap it out. They sell one, or you might be able to make one from a couple of old sockets or tube or something if it's the right size. You have to be able to press the washer down enough to get the snap ring out, but the OD of the press has to be small enough for the snap ring to be removed and replaced.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Dodge Off Road (11/6/2019)

Submit an answer

Questions about this item? Ask here.

Dodge Off Road Track Bar 3rd Gen Lifted - 03-09

$659.00

Typically Ships in 5 to 10 Days

(1)

Select Options

Dodge Off Road 3rd and 4th Gen Front End Upgrade Kit

$1,575.00

Typically Ships in 3 to 4 Weeks

Select Options

Dodge Off Road Track Bar 3rd Gen - 03-09

Choose Options

Q: What size threads are on the Heim joint on the axle side and right or left hand thread?

Q: I ordered this three weeks ago. Where is it? You already charged me.

Q: What rebuild kit do you order when the bushings etc wear?

Related Items

Browse Similar Items