Dodge Off Road Track Bar 5th Gen 14-18

Write a Review

Your Price: $299.00

DOR Track Bar 5G 14-18

Questions about this item? Ask here.

Part Number: 1018

Availability: Typically Ships in 5 to 10 Days

Quantity

Description
Questions and Answers

Our new 4.5 gen track bar is extremely high quality, at a very affordable price. This is built similarly to our 3rd and 4th gen track bars, however we are using a new FK Bearings uniball at the frame side of the track bar, made with a 17-4 PH heat-treated stainless race and 440c heat-treated stainless steel ball, and 4130 chromoly housing. The bar itself is made out of 1.5" OD .250" wall 1026 DOM tube, and the axle end utilizes a huge 7/8" 4130 chromoly heat-treated and cryo-frozen heim joint with our custom CNC machined 303 stainless hardware. We use a hex tube adapter at the axle end to help you get the jam nut tight without scratching up the tube. These track bars are bent for extra differential clearance, as well as axle mount clearance, and works on all trucks from just below stock height, up to 3" of lift. These also fit into any track bar drop bracket that the stock track bar fits.

Compare our track bar to any others on the market and you will find that ours is built as well as any, however we are able to sell them at a lower price because we build them ourselves. Every step of production is done in our shop, start to finish, and we pass the savings on to our customers. You can pay up to $100 more for the same product, or you can buy our track bar and put that $100 towards one of our steering braces and tighten your whole front end up in one shot.

This fits 2014 to 2018 Ram 2500 4x4 trucks with the radius arm front end, including Power Wagon models.

This fits 2013 to 2018 Ram 3500 4x4 trucks with the radius arm front end.

This will not fit the 2019 Ram trucks unless you clearance your factory track bar mount on the frame. We will have a listing for the new 5th gen 2019+ track bar soon.

Q: I have your 2nd gen HD 0-3" lift track bar, with 2" front level with 3/4" longer control arms. Currently the stock diff cover hits the track bar near bottom out. I'm wondering if you can tell me the lengths of your 3rd, 4th, and 5th gen front track bars, to see those might fit on my 2nd gen setup since those bars have a bend for diff clearance. I can adjust length no problem, I just want to know if these later-gen bent bars are remotely in the right ballpark for length. My bar is currently adjusted to 37.625" long.

Asked by: Joe - 10/9/2019

A: We don't give out measurements online due to other companies trying to copy our products, but I can tell you 100% for sure that the 3rd/4th/5th gen track bar will not fit our 2nd gen track bar bracket, and it's too long to bolt up. We can bend you a custom track bar to fit your 2nd gen if needed, just call or email us. If the track bar is hitting the stock diff cover at that height, something else is wrong - it shouldn't even be close. Our bracket moves the track bar forward several inches so typically the bar is in front of the diff until you get up to 2" to 2.5" forward, at that suspension height. Get in touch with our tech department and we'll help figure out what is going on, and how to fix it.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Dodge Off Road (11/6/2019)

Submit an answer

Q: Will this front track bar work with 10" lift?

Asked by: Eric A McCaslin - 10/27/2019

A: It will fit as long as you have a drop bracket, which I'm sure you do. Our track bar will fit anywhere a stock track bar fits.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Dodge Off Road (11/6/2019)

Submit an answer

Q: Is this a front track bar for a 2016 3500 diesel4x4 shortbed and will it work with a 4" lift? Thanks

Asked by: George Daniel Howard - 2/19/2020

A: Yes, this track bar is the correct one for your truck and it will work with a 4" lift. It fits anywhere the stock track bar fits (factory bracket or aftermarket drop bracket), it's just stronger and adjustable so you can center your axle up when the truck is lifted.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Dodge Off Road (2/20/2020)

Submit an answer

Questions about this item? Ask here.

150 points will be rewarded to you when you buy this item.

All hardware included (bearing not shown)

Dodge Off Road Steering Brace - 5th Gen 13-20

$199.00

Typically Ships in 3 to 5 Days

(4)

Add To Cart

The world's first and only bolt-in steering replacement for 2014 and up trucks

Dodge Off Road 5th Gen Steering Linkage

$699.00

Typically Ships in 2 to 3 Weeks

Select Options

Dodge Off Road Rear Track Bar 2014-2020

$299.00

Typically Ships in 10 to 15 Days

Add To Cart

Dodge Off Road Track Bar 5th Gen 14-18

Q: Will this front track bar work with 10" lift?

Q: Is this a front track bar for a 2016 3500 diesel4x4 shortbed and will it work with a 4" lift? Thanks

Reward Points

Related Items

Browse Similar Items